Sensors - MultiTest

ILC Loadcells

The ILC range of interchangeable tension and compression loadcells is specially adapted to the MultiTest-i and -xt test systems.

They plug into the frame and their calibration characteristics are immediately recognised by the software of the tester without any input from the operator.

Each loadcell is fitted with a threaded hole or stud for connection to a range of grips to hold your specimens.

To ensure that you have the optimum selection to meet all your tension and compression testing needs, eighteen different loadcells are available. All loadcells measure from zero and cover the range from 2 N right up to 50 kN.

Loadcell capacity, range and accuracy

Each loadcell reads from zero to its full nominal capacity (listed below). Measurement accuracy is an outstanding ±0.1% or ±0.25% of the loadcell capacity.

Mecmesin issued sensor and device calibration certificates

Each sensor is delivered as standard with its own calibration certificate traceable to national standards.
 

Servicing and calibration

Mecmesin service - mobile and at home

Mecmesin also provides annual servicing and torque sensor re-calibration. Talk to one of our engineers or your local national distributor to find out more.

 

ILC (2 - 500N)

Features a loadcell in a housing with a dovetailed fitting to mount on the crosshead of a single- or twin-column test stand.

Compact design saves space and maximises available daylight.

ILC-S (100 N - 5 kN)

Features an S-beam loadcell beneath a housing with a dovetailed fitting to mount on the crosshead of a single- or twin-column test stand.

The S-shape allows a greater contact surface with grips to provide enhanced stability.

ILC-T (10 - 25 kN)

Features an S-beam loadcell beneath a housing with a through-hole to bolt onto the crosshead of a twin-column test stand.

The S-shape allows a greater contact surface with grips to provide enhanced stability.

ILC-P (20 - 50 kN)

Features a Pancake loadcell beneath a housing with a through-hole to bolt onto the crosshead of a twin-column test stand.

The Pancake design suits higher loads and provides greater overload protection particularly against extraneous loads.

Images
MultiTest-i 2.5 kN automated force testing system, sensor/loadcell emphasised